Sentek EnviroSCAN System
A water-content-profile probe up to 2 m in length
Current Products
No Retired
ENVIROSCAN Water-Content-Profile Probe
The EnviroSCAN probe provides soil-water-content profiles for irrigation scheduling or other water movement systems. The measurement range is oven dry to saturation. The probes measure...
SEN80040 EnviroSCAN Probe Cutting Edge, Blue
The SEN80034 is used with our EnviroSCAN probe. This blue cutting edge has a long shaft and can be used in heavy clay soils.
SENSDI12CBL-L Interface Cable
The SENSDI12CBL cable connects an EasyAG probe to the datalogger. This cable is required for the SEN12012, SEN14012, SEN13012, or SEN17012 EasyAG probes. The SENSDI12CBL...
SEN07050 Install Kit Part A
The SEN07050 includes an auger and other tools and accessories for boring a pilot hole for the installation of the EnviroSCAN probe.
SEN07150 EnviroSCAN Install Kit Part B
The SEN 07150 includes a tripod and other tools and accessories to keep the auger in a stationary central position and prevent disturbance to the...
SEN70060 EnviroSCAN Installation Normalization Container
The SEN70060 includes a PVC sleeve that transects a container that can be filled with water. The EnviroSCAN is then inserted into the sleeve, allowing...
SEN80090 Kaolin Clay, 5-kg Bag
SEN80090 is 5 kg of kaolinite (potter's clay as fine powder) that is used in some installations of EnviroSCAN probes.
SEN80125 Silica Gel, 25-g Bag
The SEN80125 consists of 10 silica gel bags used to maintain a noncondensing environment inside of the EnviroSCAN soil probe access tube.
SEN06021 Programming Cable
The SEN06021 is a 6-ft cable. It is required for normalization and setup of an EnviroSCAN or EasyAG probe. The SEN70508 EasyAg Installation Kit, SEN70518...
SEN06025 Utility Software for EnviroSCAN or EasyAG
The SEN06025 software is required for the normalization and setup of an EasyAG or EnviroSCAN probe. To install an EasyAG probe, the SEN70508 EasyAg Installation...
SEN80127 Ferrite Bead
A SEN80127 ferrite bead is used with our EasyAG and EnviroSCAN probes. It is a hollow cylinder that reduces electromagnetic noise when looped into probe...
Resources and Links
About Sentek EnviroSCAN System
EnviroSCAN™ is used to measure water content profiles, especially in research-grade applications. The many accessories associated with this product are also listed here.
Feedback?