39070 Concrete Anchor Kit for UTBASE

Ordering Info Ask a Question Ask a Question

Mount a UT20/30 Tower to an Existing Concrete Pad or Rock

Images
Similar Products
Specifications
Associations

Overview

The 39070 is a set of three 3/4-10 x 6.25 316 stainless-steel, wedge-style anchors. The anchors are used with the UTBASE Base Kit to mount a UT20 or UT30 tower to an existing rock or concrete pad. If the concrete pad or rock is smaller than the recommended concrete base, be aware of the lower wind rating or use guy wires. The tower wind rating is not affected by the anchors themselves. The included jam nuts are intended to be a part of the permanent installation to keep the anchor wedges engaged. Installing the anchors vertically is critical for leveling the tower. Correct anchor spacing to mate with the UT20 and UT30 towers is a triangle with equal 43.18 cm (17 in.) sides. The anchors must be installed at least 9.53 cm (3.75 in.) deep.

The 39070 anchor kit is an option when purchasing the UTBASE Base Kit for the UT20 and UT30 towers, and it may be purchased separately, at a later date, as a replacement item.