I want to use a couple of CR10X loggers as 'remote input units', logging data to a CR1000 logger connected via RF450 radios. Is this possible to do?
I've used array-based CR10X loggers, never pakbus or table-based ones, but I assume that is what would be needed here. I have the latest pakbus OS for CR10X but haven't upgraded them yet.
I've used CR1000 loggers and RF450 radios, but only in a point-to-point configuration; I assume a multipoint network would be able to do what I want. I need to have a look at the RF450 manual as it probably covers this.
I guess another option might be to use SDI12 from the array-based CR10X loggers to the CR1000, but not sure that's the best use of the RF450 radios.
The CR1000, CR10X-PB and RF450s are all supported in the Network Planner. That's where I'd start in setting up this type of network.