Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

Vector images


mwassmer May 6, 2010 06:48 PM

I am developing a set of Microsoft Visio wiring diagrams for Campbell Scientific-based installations. These diagrams would benefit greatly from a library of vector-based graphic images for Campbell Scientific equipment.

Figure 2 in the CR1000 manual is an example of the type of image to which I am referring.

Is such a library available for use by your customers?

Regards,
Mike Wassmer
National Renewable Energy Lab

* Last updated by: mwassmer on 5/6/2010 @ 12:48 PM *


Admin May 6, 2010 07:27 PM

Hi Mike,

Over the last few years we've been transitioning away from vector illustrations--so we don't have them for most of our current products. Going forward, we'll mostly use raster images (with good resolution). If you can use raster images, I'll send you a few more details by email.


mwassmer May 6, 2010 09:08 PM

Yes, I'll take you up on that offer for the raster images. I'll look for something in my e-mail.

Thanks.


BrianC Feb 9, 2012 11:26 PM

I am also looking for Visio shapes representing CSI equipment (mostly Met-related) Could I also get whatever images you may have, which I can import into Visio?

Thanks!


AJ Feb 15, 2012 04:18 PM

If I could get the image of the CR1000 it would be very helpful as well.

Thanks


aps Feb 15, 2012 04:37 PM

I have put some Visio drawings of the terminals for three of our common loggers in here:

ftp://ftp.campbellsci.co.uk/pub/csl/outgoing/support/

We use those for some simple wiring diagrams internally.

You can find a selection of other images by going to the product page on this website and clicking on the image gallery link. Many products including the CR1000 have a range of images in different formats although not visio ones currently.

* Last updated by: aps on 2/15/2012 @ 9:43 AM *


AJ Mar 8, 2012 06:30 PM

Thanks aps. Is there any way i could the 3d cad file or a full scale sized png? It would be useful for planning enclosure designs.


mjb Oct 22, 2015 01:14 AM

Every time I go to update or create a visio document with wiring digrams, I die a little bit inside because I can't get a decent visio stencil to use. :(

I'd love the 3d images in the image galleries to include a top down view, which would be the next best thing (CR1000 has one, see below).

Could these be created, and simply added to the image galleries on your website?

I'm currently specifically after a CR800 image like this CR1000 one: https://s.campbellsci.com/images/12-577.png

Cheers,
Mike.


jra Oct 23, 2015 05:03 PM

Mike, Send me your email address and I'll get something to you.
jalbers {.at.} campbellsci {.dot.} com
Our images department is working on making these more accessible.
Thanks for your feedback.
Janet


jaritsaa44 Oct 15, 2023 07:57 PM

This post is under review.

Log in or register to post/reply in the forum.