29370
29370
OrderableCPI Network Kit
Overview
One 29370 kit is needed for each CPI network, such as those using a CDM-VW300, CDM-VW305, or SC-CPI. Among the items included in the 29370 kit is a roll of yellow vinyl electrical tape to distinguish Ethernet cables that use CPI protocol from similar cables used for TCP/IP.
Technical Description
The 29370 kit includes:
(1) 28558 Termination resistor plugs
(1) 28899 2 ft Cable RJ-45 to RJ-45
(2) ft-long red power wires
(2) ft-long black power wires
(1) 29492 20 ft Roll of Yellow Tape to label CPI RJ-45 cables
Specifications
- Weight
- 122.47 g
(0.27 lb)
Replacement Parts
(4)27555
USB 2.0 Cable, Type A Pin (Male) to Micro B Pin (Male), 6/6.5 ft
The 27555 is a USB Type A to Micro B, pin (male)-to-pin (male) cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.
Orderable29492
Yellow Vinyl Electrical Tape
The 29492 provides a roll of yellow tape. It is used to label the CPI RJ-45 cables. The tape is on a roll that is .500 in. wide by 20 ft long.
Orderable28558
Modular RJ45 Resistor Termination Plug for CPI Bus
These termination resistor plugs are included in the 29370 CPI Network Kit. The 28558 may also be purchased as a replacement part.
Orderable28899
CAT6 Ethernet Unshielded Cable with RJ45 Connectors, 2 ft
The 28899 is a 2 ft, unshielded CAT6 network cable with RJ45 connectors. It is typically used to connect CDM devices together or to an SC-CPI. This cable is also used to connect one of our many Ethernet-capable products to an Ethernet device or network connection.
Orderable
Ships With
(6)27555
USB 2.0 Cable, Type A Pin (Male) to Micro B Pin (Male), 6/6.5 ft
Orderable28558
Modular RJ45 Resistor Termination Plug for CPI Bus
Orderable28899
CAT6 Ethernet Unshielded Cable with RJ45 Connectors, 2 ft
Orderable- ft-long Red Power WiresQty 2
- ft-long Black Power WiresQty 2
29492
Yellow Vinyl Electrical Tape
Orderable