46655
46655
OrderableReplacement Desiccant Kit for CSAT3B(H) and CSAT3C
Overview
The 46655 kit includes a 1.5-gram canister of desiccant to keep the internal anemometer electronics dry, a cap to seal the canister, an O-ring, and a 2-gram dielectric grease pillow pack to lubricate the O-ring. This kit may be purchased for desiccant replacement in the CSAT3B, CSAT3BH, and CSAT3C anemometers.
Note: The canister in this kit is sized differently than the one previously used with the CSAT3B and CSAT3BH. Customers who have not already switched to the 44413 cap will need to use the cap in the 46655 kit. If a CSAT3B or CSAT3BH is returned to Campbell Scientific via a Return Material Authorization (RMA), their anemometer will be updated to use the newer parts.
Specifications
- Kit Bag Dimensions
- ~10.16 x 15.24 cm
(~4.0 x 6.0 in.)
- Weight
- 28.35 g
(1.0 oz)
Services
(2)16554
CSAT3A/B/BH/C Standard Calibration without CMM or Data
The 16554 provides calibration over the CSAT3A, CSAT3B, CSAT3BH, or CSAT3C operating temperature range without using the coordinate measurement machine (CMM); the CMM is used on the CSAT3B at time of original purchase. During calibration, Campbell Scientific determines if the geometry of the heads has changed since original manufacture. If so, the 16555 calibration is required. In all cases, factory calibration requires a Return Material Authorization (RMA).
Orderable16555
CSAT3A/B/BH/C Calibration with CMM but without Data
The 16555 includes calibration over the CSAT3A, CSAT3B, CSAT3BH, or CSAT3C operating temperature range and coordinate measurement of transducer positions in space relative to the bubble mounting surface. CMM measurement is performed on the CSAT3B at time of original purchase. This calibration option is required if the geometry of the heads has changed since original manufacture. In all cases, factory calibration requires a Return Material Authorization (RMA).
Orderable
