CS205
CS205
Orderable10-Hour Fuel Temperature Stick (without sensor)
Overview
The CS205 is a hollowed-out ponderosa-pine dowel that emulates the temperature of similarly sized twigs on the forest floor. Fuel temperature is measured by inserting the thermistor-based 107 probe inside the CS205 dowel. The CS205 and 107 probe are often incorporated in our prewired or custom fire-weather stations.
Key Advantages
Technical Description
The CS205's ponderosa pine dowel is fabricated to US Forest Service specifications, but with a hole bored into one end. Dowel replacement is recommended every spring; more frequent replacement may be required in some environments (i.e., those with a large number of wet/dry cycles). The CS205 is easily replaced in the field using a Phillips screwdriver and an adjustable wrench.
Product Notes
Benefits
- Companion product to CS506 fuel moisture sensor; can be mounted on the same stake
- Used with the 107 probe to measure fuel temperature for forest fire applications
Specifications
- Material
- Ponderosa Pine
- Diameter
- 1.3 cm
(0.5 in.)
- Length
- 11.4 cm
(4.5 in.)
- Weight
- 9.07 g
(0.32 oz) for stick only
Other Accessories
(2)10974
Mounting Stake for CS505 or CS205 (holds 1 of each)
The CS205/107 Fuel Temperature Sensor is typically measured alongside the CS505; the entire assembly is usually mounted on a 10974 Fuel Moisture/Temperature Mounting Stake. The 10974 Stake can be ordered along with CS205 purchase or afterwards as a replacement item.
Orderable26817
Mounting Kit for CS506 or CS205 (holds 1 of each)
The CS205/107 Fuel Temperature Sensor is typically measured alongside the CS506; the entire assembly is usually mounted on a 26817 Fuel Moisture/Temperature Mounting Stake. The 26817 stake can be ordered along with CS205 purchase or afterwards as a replacement item.
Orderable
Similar Products
(1)
Compatibility
Temperature Sensors
The CS205 10-hour Fuel Temperature Stick is used with the 107 or 107-LC thermistor. The 107-LC has a connector that allows it to be attached to our ET107, ET106 (retired), or MetData1 (retired) weather stations.
Fuel Moisture
The CS205/107 combination is typically measured alongside the CS506/26601 combination, which measures fuel moisture. The CS205/107 combination can also be used with the retired CS505 fuel moisture sensor and 10824 fuel moisture stick.
Mounting
The 26817 Mounting Stake is often used to mount the CS205/107 with the CS506/26601. This stake places the probes twelve inches above the forest floor. Because the probes are mounted parallel to each other, shadowing is minimized. Cable ties are included for securing the cables to the side of the stake.
The 10974 Mounting Stake is used to mount the CS205/107 with the CS505/10824.