HC2S3-QD
HC2S3-QD
RetiredTemperature and Relative Humidity Probe for RAWS-F
No longer available to order
This product is retained for service, documentation, and compatibility information.
- Model:
- HC2S3-QD
- Item Number:
- 28669
- Warranty:
- 1 year
Overview
The HC2S3-QD is a rugged, accurate temperature and humidity probe that is ideal for long-term, unattended applications. The probe uses an advanced capacitive sensor to measure relative humidity. The probe includes a filter to protect the sensor from dust and particles, for superior performance and reliability.
Key Advantages
Wired for RAWS-F Station
Technical Description
The HC2S3-QD comes with a polyethylene filter that protects its sensor from fine dust and particles and minimizes water absorption and retention. Alternatively, a Teflon filter is available for marine environments. The response time is slower when using the Teflon filter.
Specifications
- Electronics Operating Limits
- -40° to +100°C
- Storage Temperature
- -50° to +100°C
- Filter
- Polyethylene (standard) or Teflon (optional, ordered separately)
- Current Consumption
- < 4.3 mA
(@ 5 Vdc)
< 2.0 mA(@ 12 Vdc)
- Supply Voltage
- 5 to 24 Vdc
- Startup Time
- 1.5 s
(typical) The startup time is Rotronics specification. For programming, Campbell Scientific recommends a 2 s delay at 60°C, 3 s delay at 0°C, and 4 s delay at -40°C.
- Maximum Startup Current
- < 50 mA for 2 μs
- Diameter
- 15 mm
(0.6 in.)
- Cable Length
- 165.1 cm
(65 in.)
- Length
- 85 mm
(3.3 in.) without connector
121 mm(4.75 in.) with connector
- Weight
- 10 g
(0.35 oz)
Analog Outputs
- Offset at 0 V
- ±3 mV
(maximum)
- Deviation for Digital Signal
- < ±1 mV
(0.1°C, 0.1% R. H.)
Air Temperature
- Temperature Sensor
- PT100 RTD, IEC 751 1/3 Class B
- Measurement Range
- -40° to +60°C
(default) Air temperature measurement ranges from -50° to +100°C are possible; contact Campbell Scientific for more information.
- Output Signal Range
- 0 to 1 V
- Accuracy at +23°C
- ±0.1°C
(with standard configuration settings)
- Long-Term Stability
- < 0.1°C/year
- Sensor Time Constant
- 63% step change (1 m/s air flow at sensor)≤ 22 s
(standard PE filter)
≤ 30 s(optional Teflon filter)
- Temperature Accuracy
- Refer to the graph in the manual.
Relative Humidity
- Sensor
- ROTRONIC® Hygromer IN-1
- Measurement Range
- 0 to 100% RH
(non-condensing)
- Output Signal Range
- 0 to 1 Vdc
- Long-Term Stability
- < 1% RH per year
- Response Time
- Typical 10 s, 63% of a 35% to 80% RH step change
(1 m/s air flow at sensor)
- Accuracy at +23°C
- ±0.8% RH
(with standard configuration settings)
- Sensor Time Constant
- 63% of a 35 to 80% RH step change (1 m/s air flow at sensor)≤ 22 s
(standard PE filter)
≤ 30 s(optional Teflon filter)
- RH Accuracy over Temperature
- Refer to the graph in the manual.
Common Accessories
(3)41003-5
10-Plate Solar Radiation Shield
The 41003-5 provides a 10-plate naturally-aspirated radiation shield that houses one HC2S3 probe. Its louvered construction allows air to pass freely through the shield thereby keeping the probe at or near ambient temperature. The 41003-5 attaches to a crossarm, mast, or user-supplied pipe with a 1.0" to 2.1" OD.
OrderableRAD10
10-Plate Solar Radiation Shield for Small Sensors
The RAD10 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement.
Orderable27755
HC2S3 Replacement Teflon Filter
The 27755 is a Teflon Filter with smaller pore size (10 micron) that provides good protection against fine dust particles and salt (marine environments), but with slightly slower response than for the polyethylene filter.
Orderable
Replacement Parts
(2)27730
HC2S3 Replacement Polyethylene Filter
The 27730 is a replacement polyethylene filter.
Orderable27731
Solar Radiation Shield Hex Plug for for Mounting the HC2S3 inside the 41003-5
The 27731 hex plug is required to mount the HC2S3 temperature and relative humidity sensor in the 41003-5 10-plate radiation shield.
Orderable
Ships With
(2)- NIST Calibration Certificate from original mfg (small folded paper inside of box)
27731
Solar Radiation Shield Hex Plug for for Mounting the HC2S3 inside the 41003-5
Orderable
Compatibility
The military style connector attaches to the RAWS-F Fire Weather Quick Deployment Station, which has an on-board CR1000.
Mounting
The HC2S3-QD should be housed in a 41003-5 10-plate naturally-aspirated solar radiation shield.
Services Available
- Calibration
- Yes