LS300G
LS300G
End of life3G GSM Cellular Gateway
No longer available to order
This product is retained for service, documentation, and compatibility information.
Replaced by
- RV50
Industrial 4G LTE Cellular Gateway
- Model:
- LS300G
- Item Number:
- 31099
- Warranty:
- 3 years
Overview
The LS300G is a cellular gateway for use on GSM/GPRS/EDGE/HSPA+ networks such as AT&T, Rogers, Bell, and Telus. The LS300G comes standard with Ethernet, USB, and serial interfaces, making it easy for you to configure, deploy, and connect it to Campbell Scientific data loggers, cameras, radios, and more.
Key Advantages
For GSM/GPRS/EDGE/HSPA+ networks
Technical Description
The LS300G is a cellular gateway (also commonly referred to as a cell/cellular modem). It is locally and remotely manageable using Sierra Wireless's ACEManager™ web interface or AT and AToIP commands.
Please note the power requirements for this device. The LS300G draws significantly more current than the RavenXTG. In many cases, a station that leaves the LS300G on continuously will require at least a 50W solar panel and an 84 Ah battery (10 days of battery reserve). As such, most users will attach the power input of the LS300G to the SW12 port on the data logger or to a power relay controlled by the data logger.
Specifications
- Carrier Approval
- AT&T
- Network
- 3G HSPA+
(with fallback to GSM/GPRS/EDGE)
- Host Interface
- 10/100 Base-T RJ45 EthernetRS-232 serial port, DB9 femaleUSB V2.0 with micro-B connector2 SMA antenna connectors
(primary, GPS/diversity)
Active antenna support - Input Voltage
- 7 to 28 Vdc
- Typical Current Drain
- 185 mA
(at 12 Vdc when dormant, which is idle for 10 to 20 s)
255 mA(transmit/receive)
- Frequency
- GSM/GPRS/EDGE: 1900/850/900/1800 MHz
This product uses the LS300G Sierra Wireless SL8090 radio module. Contact Campbell Scientific if you require WCDMA operation at 900/2100 MHz (SL8092 radio module).WCDMA: 1900/2100/850 MHz
This product uses the LS300G Sierra Wireless SL8090 radio module. Contact Campbell Scientific if you require WCDMA operation at 900/2100 MHz (SL8092 radio module). - Operating Temperature Range
- -30° to +70°C
(-22° to +158°F)
- Storage Temperature Range
- -40° to +85°C
(-40° to +185°F)
- Humidity
- 90% RH
(@ 60°C)
- Military Specification
- MIL-STD-810 conformance to thermal, mechanical shock, and humidity
- Industry Certification
- PTCRB, R&TTE, FCC, Industry Canada, CE, RoHS Compliant, Class 1 Div 2
- Dimensions
- 76 x 90 x 25 mm
(3.0 x 3.5 x 1.0 in.)
- Weight
- 190 g
(6.7 oz)
Accessories
(12)18663
Null Modem Cable, 9-Pin PIn (Male) to 9-Pin Pin (Male)
OrderableSC105
CS I/O to 9-Pin RS-232 DCE Synchronous Interface
Orderable27555
USB 2.0 Cable, Type A Pin (Male) to Micro B Pin (Male), 6/6.5 ft
Orderable21847
Cellular Phone Antenna Cable, Type N Pin (Male) to SMA
OrderableCOAXSMA
LMR195 Antenna Cable with SMA and Type N Pin (Male) Connector
OrderableCOAXNTN
RG8 Antenna Cable with 2 Type N Pin (Male) Connectors
Orderable31317
Surge Protection Kit, Type N to SMA, 700 to 2700 MHz
OrderableCM230
Adjustable Inclination Mounting Kit
OrderableCM230XL
Adjustable Angle Mounting Kit, Extended Length
Orderable21212
Black Cold Shrink Tape
Orderable28899
CAT6 Ethernet Unshielded Cable with RJ45 Connectors, 2 ft
Orderable31182
27 dBi GPS Antenna with 3 V Magnetic Mount and SMA Connector
Orderable
Common Accessories
(10)18663
Null Modem Cable, 9-Pin PIn (Male) to 9-Pin Pin (Male)
The 18663 is one method to connect the modem with the datalogger. This null modem cable attaches directly to the datalogger's RS-232 port.
OrderableSC105
CS I/O to 9-Pin RS-232 DCE Synchronous Interface
The SC105 is one method to attach the modem to the datalogger. This interface connects the modem with the datalogger's CS I/O port.
Orderable27555
USB 2.0 Cable, Type A Pin (Male) to Micro B Pin (Male), 6/6.5 ft
Use to connect to pc via USB port.
Orderable21847
Cellular Phone Antenna Cable, Type N Pin (Male) to SMA
The 21847 has a 12-foot length. It consists of an LMR195 coaxial cable that terminates in a Type N Male connector on the "antenna end" and an SMA connector on the "transceiver end." If surge suppression is required, use the COAXNTN-L cable and 31317 Surge Protection Kit instead of this cable.
OrderableCOAXSMA
LMR195 Antenna Cable with SMA and Type N Pin (Male) Connector
The COAXSMA-L is a LMR195 coax cable terminated with a Type N male connector on one end (antenna) and a SMA male connector on the other (cellular gateway). It is custom ordered to length. If surge suppression is required, use the COAXNTN-L cable and 31317 Surge Protection Kit instead of this cable.
OrderableCOAXNTN
RG8 Antenna Cable with 2 Type N Pin (Male) Connectors
The COAXNTN-L is a low-loss RG8 coaxial cable. The COAXNTN-L/31317 combination is recommended over the COAXSMA or 21847 when a modem is used in an environment susceptible to lightning or electrostatic buildup.
Orderable31317
Surge Protection Kit, Type N to SMA, 700 to 2700 MHz
The 31317 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
OrderableCM230
Adjustable Inclination Mounting Kit
The CM230 Adjustable Inclination Mount allows the antenna to be aimed at the service provider's antenna. It attaches to a mast or pipe with a 1.3" to 2.1" OD.
OrderableCM230XL
Adjustable Angle Mounting Kit, Extended Length
The CM230XL provides the same functionality as the CM230, but the CM230XL places the antenna further from the pole or crossarm.
Orderable21212
Black Cold Shrink Tape
This 10 ft (3.1 m) roll of 1"-wide black self-vulcanizing tape can help protect the connection of outdoor antennas. After connecting the coaxial cable to the antenna, wrap the tape around the connectors that are exposed to the environment.
Orderable
Other Accessories
(2)28899
CAT6 Ethernet Unshielded Cable with RJ45 Connectors, 2 ft
Can only be used to connect to CR6 or datalogger with NL device.^Used to connect to PC for configuration via RJ45 port.
Orderable31182
27 dBi GPS Antenna with 3 V Magnetic Mount and SMA Connector
The 31182 is a magnetic mount GPS patch antenna. It is typically used where GPS reception is readily available and concern is low for snow buildup completely covering the antenna. The 31182 is also commonly used in cost-sensitive applications or applications that require a small-sized, low-profile antenna. This antenna connects to a GPS receiver with SMA connector, such as that found in the LS300G. The antenna package is waterproof and corrosion resistant.
Orderable
Replacement Parts
(2)31098
CAT6 Ethernet Unshielded Cable with RJ45 Connectors, 5 ft
The 31098 is a 5 ft, unshielded CAT6 network cable with RJ45 connectors. It is typically used to connect a PC or one of our many Ethernet-capable products to an Ethernet device or network connection.
Orderable32399
Replacement DC Power Cable with I/O for RV50, RAVENXTV, RAVENXTG, or LS300G
The 32399 is a power cable for the LS300G. In the event that the original power cable becomes damaged, this cable can be ordered as a replacement.
Orderable
Similar Products
(1)
Compatibility
The LS300G will connect to any of our devices that have an RS-232 serial or Ethernet port.
- When connecting the LS300G to an RS-232 DCE device such as the CR1000, use the 18663 Null Modem Cable.
- When connecting to the CS I/O port of a data logger, use the SC105.
When using the LS300G as a replacement for the RavenXTG, ensure that your station's power supply and recharge are adequate to handle the increased power consumption when active.
| Data Logger | Recommended Accessory for Connecting to LS300G |
|
CR6 |
31055 (CPI to RS-232), SC105, or 28899 (Ethernet cable for direct connection to Ethernet port on CR6) |
|
CR200(X) Series |
18663 or NL201 |
|
CR800 Series |
18663, SC105, or NL201 |
|
CR1000 and CR3000 |
18663, SC105, NL120, or NL201 |
|
CR3000 |
18663, SC105, NL120, or NL201 |
|
CR5000 |
18663, SC105, or NL201 |
|
CR510 and CR10X |
SC105 |
|
CR510-PB and CR10X-PB |
SC105 or NL201 |
|
CR23X |
18663 or SC105 |
|
CR23X-PB |
18663, SC105, or NL201 |
Related Resources
Case Studies
Documents
Downloads
Services Available
- Repair
- No
- Calibration
- No
- Free Support
- No