10859

42815

Four-Unit Desiccant Bags (quantity of 10)

The 42815 includes 10 large, four-unit desiccant bags, used to absorb humidity within enclosures. Multiple packs are recommended for customers who need to desiccate multiple enclosures or systems.

4335

10 AWG Green Copper Stranded Wire

This 10-gauge copper wire provides a ground lug-to-ET107 ground connection. No hardware is included.

12183

Screw 5/8-11 x 12 Stainless-Steel J-Bolt Anchor Kit with Nuts (set of 3)

The 12183 is used to anchor an ET107 or ET106 station to a concrete pad. This j-bolt anchor kit is shipped with the 10581 ET Shipping Kit, and it is available as a replacement item. This kit includes: Three 5/8-11 x 12 stainless-steel J-bolts Six 5/8 flat washers Nine 5/8-11 silicon bronze nuts Three 5/8 lock washers

10754

Gray PVC Coupling, 90 Degree Elbow, 18 in. Radius

The 10754 may be purchased to replace a lost or damaged coupling.

850

Tripod or Tower Lightning Rod

The 850 may be ordered to replace a lost or damaged lightning rod.

2207

4 in. Nylon Cable Tie

The cable tie is constructed from a flexible, nylon material. A connection is made by pulling the tapered end through the locking end, thus forming a loop. The free end is pulled tight to secure the cables, then trimmed back to the locking end. Once attached, the cable tie must be cut to be removed.

8125

Flat-Bladed Screwdriver, 2.5 mm Blade x 50 mm Shaft

The 8125 is a small, flat-bladed screwdriver. The blade is 2.5 mm across, and the untapered shaft length is 50 mm. The handle has an approximate length of 9 cm, and it features a rotating end-cap that makes the screwdriver easy to rotate.

6290

#1 Phillips Screwdriver

The 6290 Phillips head screwdriver is commonly used to drive 505 screws into 6044 grommets, which are in turn seated into the square holes on the backplates of our enclosures.