15920
OrderableDIN Rail Mountable 3-Wire 4 mm Spring-Loaded Connector
Overview
The 15920 is a DIN rail mountable terminal connector that can be used between sensors (or other devices) and a data logger. The 15920 is a three-wire, 4-mm spring-loaded connector. An 8125 flat-bladed screwdriver is used to open the spring-cages for wire entry.
Specifications
- Hardware Type
- Terminal block
- Why/When to Use
- Sensor connections
- Grounded
- No
- Number of Wires
- 3 (28 to 16 AWG)
- Connection Method
- Spring clamp
- Maximum Ferrule Size
- 22 AWG
- Mounting Width
- 3 mm
- Dimensions
- 6.22 x 0.38 x 6.22 cm
(2.45 x 0.15 x 2.45 in.)
- Weight
- 4.54 g
(0.01 lb)
Common Accessories
(3)15907
End Plate/Separator for DIN Rail Connector
This end plate is used to separate the 15920 Terminal Strips. Up to twenty terminal strips fit on the mounting bracket of the 5 in. DIN rail kit.
Orderable15909
Horizontal Jumper for DIN Rail Connector
This horizontal jumper is used to electrically connect the 15920 DIN rail terminals to another terminal of the same part number.
Orderable22190
DIN-Rail Connector Number Block Label 1 to 99 for 15920, 21329, or 21330
The 22190 is a block of labels numbered 1 to 99 to be used with the 15920.
Orderable
Similar Products
(11)15907
End Plate/Separator for DIN Rail Connector
Orderable15908
DIN Rail Stopper
Orderable15909
Horizontal Jumper for DIN Rail Connector
Orderable28374
DIN Rail Mountable 2-Wire 5.2 mm Screw Connector
Orderable33251
DIN Rail Mountable 2-Wire 5.2 mm Grounded Screw Connector
Orderable21329
DIN Rail Mountable 6-Wire 5 mm Spring-Loaded 3-Tier Connector
Orderable21330
DIN Rail Mountable 6-Wire 5 mm Spring-Loaded 3-Tier Grounded Connector
Orderable27479
DIN Rail Mountable 6-Wire 5.2 mm Spring-Loaded 3-Tier Connector
Orderable27478
DIN Rail Mountable 6-Wire 5.2 mm Spring-Loaded 3-Tier Grounded Connector
Orderable27480
DIN Rail Mountable 2-Wire 8.2 mm Screw Connector
Orderable27481
DIN Rail Mountable 2-Wire 8.2 mm Grounded Screw Connector
Orderable
