CM221
CM221
OrderableRight-Angle Mounting Kit
Overview
The CM221 mounts a pipe or tube at 90° to another pipe or tube. It is typically used to attach a sensor with a vertical pipe (including most wind sensors) to a crossarm. The cast aluminum, right-angle mounting bracket has 3.8 cm (1.5 in.) U-bolts and hardware and will accommodate tubing with a 1- to 1.5-in. outer diameter. (For more information, refer to the Compatibility section below.)
If your application requires the ability to adjust or level your sensor, consider using the CM230 Adjustable Inclination Mounting Kit instead.
Key Advantages
Specifications
- U-bolt and Washer Material
- 304 stainless steel
- Bracket Material
- Cast aluminum
- Dimensions
- 7.6 x 7.6 x 9.1 cm
(3.0 x 3.0 x 3.6 in.)
- Weight
- 340.19 g
(0.75 lb)
Other Accessories
(2)18048
3/4 IPS, 12 in. Aluminum Pipe
The 18048 is an aluminum, 3/4" IPS pipe that typically provides an attachment point for some sensors. The 18048 is 12 in. long and is inserted in a CM220 Mount or a 1049 Nu-Rail Fitting that is mounted on the end of a crossarm.
Orderable3659
Unthreaded Aluminum Pipe, 1 in. IPS, 12 in. long
The 3659 aluminum pipe is used to mount the R. M. Young Wind Monitors, the 03002 Wind Sentry Set, the 52202 Heated Rain Gage, and the 12022 Argos Omnidirectional Antenna used with the ST-21 and ST-20 Argos Satellite Transmitters. The 3659 is also used with the 30592 WS600 Mounting Kit.
Orderable
Replacement Parts
(4)17446
Stainless-Steel U-Bolt Screw 5/16-18 x 1.500 with Silicon Bronze Nuts
The 17446 provides a U-bolt and two nuts as a replacement for the original U-bolt and nuts.
Orderable4365
Stainless-Steel Flat Washer 5/16
The 4365 can be purchased to replace a lost or damaged washer.
Orderable4366
Stainless-Steel Lock Washer 5/16
The 4366 may be purchased to replace a lost or damaged washer.
Orderable18126
5/16-18 Silicon Bronze Nut
This 5/16" nut can be purchased to replace a lost or damaged nut.
Orderable
Similar Products
(6)
Compatibility
Sensors
The CM221 is compatible with sensors that have a 0.75 to 1 in. IPS (1 to 1.5 in. OD) pipe mount.
Pipe
The CM221 is compatible with user-supplied pipe that has a 0.75 to 1 in. IPS (1 to 1.5 in. OD).
Peripherals
The CM221 can be used to mount the 17992 GPS antenna and the 27084 CVF3 Mounting Stand.
Compatible Products
(11)CM202
2 ft Crossarm with One CM210 Mounting Kit
OrderableNotes—CM202SS
2 ft Stainless-Steel Crossarm with One CM210 Mounting Kit
OrderableNotes—CM203
3 ft Crossarm with One CM210 Mounting Kit
OrderableNotes—CM204
4 ft Crossarm with One CM210 Mounting Kit
OrderableNotes—CM204SS
4 ft Stainless-Steel Crossarm with One CM210 Mounting Kit
OrderableNotes—CM206
6 ft Crossarm with One CM210 Mounting Kit
OrderableNotes—27106T
Vertical Propeller Anemometer
OrderableNotes—03002
Wind Sentry Set
OrderableNotes—05103
Wind Monitor
OrderableNotes—05305
RM Young Wind Monitor AQ
OrderableNotes—52202
Electrically Heated Rain and Snow Gage
OrderableNotes—
