16005
16005
Orderable2.4 GHz 0 dBd Omnidirectional 1/2 Wave Whip Antenna
Overview
The 16005 is a unity gain (0 dBd), 1/2 wave whip, omnidirectional antenna that can be used with our 2.4 GHz radio products with RPSMA antenna connectors. It features an articulating knuckle joint for easy orientation, weatherized jacket for outdoor applications, and internal counterpoise for ground plane independence.
Key Advantages
Technical Description
The 16005 attaches directly to a 2.4 GHz spread spectrum transceiver; an antenna cable is not needed. It has a right-angle knuckle joint that can be oriented vertically or at right angles.
Specifications
- FCC Part 15 Compliant Type
- 1/2 wave, dipole with articulating base
- Connector
- Reverse Polarity SMA (RPSMA) female
- Center Frequency
- 2.4 GHz
- Bandwidth
- 120 MHz
- Wavelength
- 1/2 wave
- VSWR
- < 1.9 typical
(at center frequency)
- Impedance
- 50 ohm
- Diameter
- 1.0 cm
(0.4 in.) at base
- Length
- 11.5 cm
(4.5 in.)
- Weight
- 11.0 g
(0.4 oz)
Similar Products
(4)16755
2.4 GHz 13 dBd Yagi Enclosed Antenna with Mounting Hardware
Orderable17480
Tri-Band 1 dBd Omnidirectional Antenna with RPSMA Connector and Adhesive Mount
Limited availabilityCOAXRPSMA
LMR195 Antenna Cable with Reverse Polarity SMA and Type N Pin (Male) Connector
OrderableCOAXNTN
RG8 Antenna Cable with 2 Type N Pin (Male) Connectors
Orderable
Compatibility
The 16005 connects to transcievers that have a reverse polarity SMA (RPSMA) connector. Campbell Scientific offers spread spectrum radios, CR200(X)-series dataloggers, AVW200-series interfaces, and Wi-Fi network links that have this connector.
