32262
32262
Orderable2 dBd 4G/3G Multiband Omnidirectional Antenna with Mounting Hardware
Overview
The 32262 is an omnidirectional antenna with mounting bracket that is ideally suited for use with 4G and 3G cellular gateways. The mounting bracket attaches to a mast or crossarm, and it serves as the antenna ground plane. The antenna has an N type (female) threaded permanent stud for easy mounting to the included bracket or through an enclosure wall. A coaxial cable, sold separately, is required to connect this antenna to the inline surge suppression or radio antenna jack.
Note: In the image, the antenna and mounting bracket are shown attached to a pole.
Specifications
Antenna
- Type
- Omnidirectional, multiband
- Use
- 4G/3G cellular, outdoor or indoor, fixed location or mobile
- Frequency Range
- 698 to 960 MHz1710 to 2700 MHz
- Nominal Peak Gain
- 1.4 dBd
(@ 698 to 960 MHz)
3.3 dBd(@ 1710 to 1990 MHz)
2.4 dBd(@ 2100 to 2700 MHz)
- VSWR
- < 2.5:1
- Radome Material
- High heat ABS
- Polarization
- Vertical
- Impedance
- 50 ohm
- Maximum Input Power
- 100 W
- Input Connection
- Type N, threaded, female
- Operating Temperature
- -40° to +85°C
- Dimensions
- 8.38 x 3.66 cm
(3.3 x 1.44 in.)
Mount/Ground Plane
- Material
- Clear anodized aluminum
- Hardware
- 5/16-18 in. x 2.125 in. stainless-steel U-bolt
(with brass nuts and stainless-steel flat and lock washers)
Common Accessories
(3)21847
Cellular Phone Antenna Cable, Type N Pin (Male) to SMA
The 21847 or COAXSMA-L is used to connect the antenna to the cellular gateway. The 21847 has a 12-foot length. It consists of an LMR195 coaxial cable that terminates in a Type N pin (male) connector on the "antenna end" and an SMA connector on the "cellular end." If surge suppression is required, use the COAXNTN-L cable and 31317 Surge Suppressor Kit instead of this cable.
OrderableCOAXSMA
LMR195 Antenna Cable with SMA and Type N Pin (Male) Connector
The COAXSMA or 21847 is used to connect the antenna to the cellular gateway. The COAXSMA consists of an LMR195 coaxial cable that terminates in a Type N pin (male) connector on the "antenna end" and an SMA connector on the "cellular end." If surge suppression is required, use the COAXNTN-L cable and 31317 Surge Suppressor Kit instead of this cable.
OrderableCOAXNTN
RG8 Antenna Cable with 2 Type N Pin (Male) Connectors
The COAXNTN is a low-loss RG8 coaxial cable. It is used to connect the antenna to an inline surge suppressor or a bulkhead connector with a Type N socket (female) connector.
Orderable
Replacement Parts
(3)18098
Eppley Solar Sensor or Cellular Antenna Mounting Stand
The 18098 is used to mount a user-supplied Eppley solar sensor or a 18285 omnidirectional antenna to a tripod or tower. This mounting stand is shipped with the 18285 antenna, and is available as a replacement part.
Orderable32261
2 dBd 4G/3G Multiband Omnidirectional Antenna
The 32261 is an omnidirectional antenna ideally suited for use with 4G and 3G cellular gateways. The antenna has an N type (female) threaded permanent stud for easy mounting through an enclosure wall. This antenna does not include mast mounting hardware. It is intended to be purchased as a replacement part for the 32262 or to be bulkhead mounted through an enclosure wall.
Orderable38485
4G/3G 9 dBi MIMO Cellular Antenna with 2 Type N Socket Connectors
The 38485 antenna is a wideband, dual-port, directional-panel antenna with slant 45 polarization that covers US LTE700/Cellular/PCS/AWS/MDS and global GSM900/GSM1800/UMTS/LTE2600 bands. The antenna is ideal for both indoor and outdoor applications. It includes a UV-stable radome enclosure that provides years of use without degradation to either mechanical properties or aesthetics.
Orderable
Compatibility
The 32262 is well suited for 4G/3G cellular communications.
Compatible Products
(8)RV50X
Industrial 4G LTE Cellular Gateway
OrderableNotes—CELL205
4G LTE CAT-1 Cellular Module for North America
OrderableNotes—CELL210
4G LTE CAT-1 Cellular Module for Verizon
OrderableNotes—CELL215
4G LTE CAT-1 Cellular Module for EMEA Countries
OrderableNotes—CELL220
4G LTE CAT-1 Cellular Module for Australia and New Zealand
OrderableNotes—CELL225
4G LTE CAT-1 Cellular Module for Japan
OrderableNotes—CR310
Measurement and Control Datalogger
OrderableNotesCompatible with the -CELL2XX options.
CR350
Measurement and Control Datalogger
OrderableNotesCompatible with the -CELL2XX options.
