CD100
CD100
OrderableMountable Display with Keypad
Overview
The CD100 is a mountable display with a keypad for data logger data entry and display. It has a vacuum fluorescent display for responsive use through a wide operating temperature range. You can operate it the same as the CR1000KD.
Key Advantages
Read data and enter instructions without opening enclosure
Technical Description
The CD100 has a 16-character keypad and a display that can show 8 lines by 21 characters (64 by 128 pixels). The keypad's design permits operation with a gloved hand. Security can be set in the data logger to prevent unauthorized personnel from accessing the data.
The CD100 is both water and dust protected, providing an IP66 rating when installed in the enclosure lid.
Custom Menus and Displays
Menus for the CD100 can be customized to simplify routine operations. Viewing data, toggling control functions, or entering notes are common applications. Individual menu screens support up to eight lines of text with up to seven variables.
Benefits
- Without opening the enclosure, check the data logger's status, display or plot sensor readings, and stored values, as well as enter numeric data
- Supports custom menus and displays to simplify routine operations
- Provides water and dust ingress protection rating IP66 when installed in enclosure lid
Specifications
- Display/Keyboard Description
- Vacuum fluorescent8 lines x 21 characters
(64 x 128 pixels) display and 16-character keyboard
- Keypad
- 16 key, alphanumeric
- Interface
- CS I/O, SDC address 2
- Power Requirements
- Powered from the data logger's CS I/O port.
- Water & Dust Ingress Protection Rating
- IP66
(when installed in enclosure lid)
- Temperature Range
- -45° to +85°C
(operating)
-50° to +85°C(storage)
-60° to +85°C(1 h) transit
- Dimensions
- 17.5 x 13.7 x 3.6 cm
(6.9 x 5.4 x 1.4 in.)
- Weight
- < 0.5 kg
(< 1 lb)
Current Drain
- Quiescent
- Negligible
(0.02 mA)
- Active
- 140 mA
Replacement Parts
(3)28400
CD100 Mounting Template
The 28400 is a template that aids the installation of a CD100 in an enclosure lid. It is shipped with the CD100 and may be purchased to replace a lost or damaged template.
Orderable3945
Flat Washer #6
Four of these washers are shipped with the CD100 Mountable Display with Keypad. They are used to mount the CD100 in an enclosure lid. The 3945 may be purchased to replace a lost or damaged washer.
Orderable8548
Nylock Nut #6-32
Four of these Nylock nuts are shipped with the CD100. They are used to mount the CD100 in an enclosure lid. An 8548 may be purchased to replace a lost or damaged nut.
Orderable
Compatibility
Compatible Products
(1)
Incompatible Products
(2)CR310
Measurement and Control Datalogger
OrderableNotesThe CR300-series dataloggers do not have the necessary CS I/O port required by the CD100 for connection to the data logger.
CR350
Measurement and Control Datalogger
OrderableNotesThe CR350-series dataloggers do not have the necessary CS I/O port required by the CD100 for connection to the data logger.
Related Resources
Documents
- Document
CD100 Cutout Diagram for Serial Numbers Less than SN1311
January 2017
View Document - Document
CD100 Cutout Diagram for Serial Numbers SN1311 and Higher
January 2017
View Document - Compliance
CD100 UK Declaration of Conformity
August 2022
View Document - Brochure
CD100 Mountable Display
March 2026
View Document
Showing 4 of 6 results
See all Documents