ENC24/30
ENC24/30
OrderablePainted Steel Enclosure, 24 x 30 inches
Pricing
Configuration
Sign in for option pricing- 2 Conduits for Cables No Enclosure Mounting No Desiccant/Doc Holder No Door Open Indicator w/o Surge Protection Hole45231-DC-NM-NA-NA-NA
- 3 Conduits for Cables Tower Mounting No Desiccant/Doc Holder No Door Open Indicator w/o Surge Protection Hole45231-TC-TM-NA-NA-NA
- 2 Conduits for Cables Tower Mounting No Desiccant/Doc Holder No Door Open Indicator w/o Surge Protection Hole45231-DC-TM-NA-NA-NA
- No Conduit/Entry Seal No Enclosure Mounting No Desiccant/Doc Holder No Door Open Indicator w/o Surge Protection Hole45231-NC-NM-NA-NA-NA
- No Conduit/Entry Seal Tower Mounting No Desiccant/Doc Holder No Door Open Indicator w/o Surge Protection Hole45231-NC-TM-NA-NA-NA
- 4 Conduits for Cables No Enclosure Mounting No Desiccant/Doc Holder No Door Open Indicator w/o Surge Protection Hole45231-QC-NM-NA-NA-NA
- 4 Conduits for Cables Tower Mounting No Desiccant/Doc Holder No Door Open Indicator w/o Surge Protection Hole45231-QC-TM-NA-NA-NA
- 1 Conduit for Cables No Enclosure Mounting No Desiccant/Doc Holder No Door Open Indicator w/o Surge Protection Hole45231-SC-NM-NA-NA-NA
- 1 Conduit for Cables Tower Mounting No Desiccant/Doc Holder No Door Open Indicator w/o Surge Protection Hole45231-SC-TM-NA-NA-NA
- 3 Conduits for Cables No Enclosure Mounting No Desiccant/Doc Holder No Door Open Indicator w/o Surge Protection Hole45231-TC-NM-NA-NA-NA
Select a configuration to add to your quote
- Model:
- ENC24/30
- Item Number:
- 45231
- Warranty:
- 1 year
Overview
The ENC24/30 is a painted steel enclosure with additional wiring room for various components, including a data logger, power supply, larger batteries, and communication and measurement peripherals. This enclosure, with a backplate with holes for mounting devices, can be ordered with one to four conduit openings or 12 cable entry seals. The ENC24/30 is designed for mounting on a tower, building, or other structure, but a user-supplied mount is required. This enclosure is available in two finishes. ENC24/30 is the mild-steel version, and ENC24/30S is the stainless-steel version.
Please note that a grounding wire is not included with the enclosure.
Key Advantages
Campbell components mount easily and securely
Technical Description
The ENC24/30's backplate is prepunched with half-inch-on-center holes suitable for attaching the data logger, power supply, communication device, and measurement and control peripheral.
This enclosure is shipped with the 7363 enclosure supply kit that consists of desiccant, a humidity indicator card, cable ties, wire tie tabs, putty, grommets, screws, and PVC coupling. Additionally, Campbell Scientific offers a CS210 Enclosure Humidity Sensor for monitoring relative humidity inside of the enclosure. (See Ordering Info on the web page.)
Benefits
- Weather resistant to protect instruments
- Backplate designed so that Campbell Scientific components mount easily and securely
Specifications
- Construction
- Painted, 14-gauge, mild steel with door gasket and stainless-steel hinges
- Enclosure Classification
- NEMA Type 3R, 4, and 12
(before being modified for cable entry)
- Number of Cable-Entry Seals
- 4 large, 4 medium, 4 small
- Dimensions
- 61 x 76 x 20 cm
(24 x 30 x 8 in.)
- Weight
- 21 kg
(46 lb)
Accessories
(7)10525
Desiccant and Document Holder for Enclosures
OrderableCS211
Smart Enclosure Sensor
Orderable6714
Four-Unit Desiccant Bags (quantity of 20)
Orderable42815
Four-Unit Desiccant Bags (quantity of 10)
Orderable31551
Enclosure Leg Stack Mounting Kit
Orderable31143
Hinged Enclosure Stack Mounting Kit
Orderable40294
Horizontal, Grid-Mount Strain-Relief Kit
Orderable
Common Accessories
(6)10525
Desiccant and Document Holder for Enclosures
The 10525 is attached to the inside of the lid of the enclosure with adhesive Velcro strips (supplied). The holder accommodates two packages of our 4-unit desiccant.
Orderable6714
Four-Unit Desiccant Bags (quantity of 20)
The 6714 includes twenty 4-unit Silica Gel Desiccant Bags.
Orderable42815
Four-Unit Desiccant Bags (quantity of 10)
The 42815 includes 10 large, four-unit desiccant bags, used to absorb humidity within enclosures. Multiple packs are recommended for customers who need to desiccate multiple enclosures or systems.
Orderable31551
Enclosure Leg Stack Mounting Kit
The 31551 is a kit to allow stacking of components inside Campbell Scientific enclosures. The kit includes two leg brackets. It is used to raise a datalogger up and off the backplate so that wiring is easier or so that components can be stacked.
Orderable31143
Hinged Enclosure Stack Mounting Kit
The 31143 is a hinged stack bracket that is designed to fit a CR1000 datalogger, CR6 datalogger, or multiplexer on either the top or underneath. The hinge enables access to the equipment underneath without disconnecting any wires (assuming that the wires are long enough).
OrderableCS211
Smart Enclosure Sensor
The CS211 is a low-power, smart sensor designed to monitor temperature and humidity levels inside enclosures. The sensor features an optical door switch to detect door openings and closings, and a multifunctional button that recognizes short, long, and double presses for user-defined actions. Additionally, the CS211 includes an LED indicator to signal enclosure wetness and when desiccant needs to be replaced.
Orderable
Replacement Parts
(9)28878
Replacement Enclosure Humidity Indicator Card
The 28878 is a replacement humidity indicator card. It provides a visual reference of humidity level inside the enclosure. Colored circles change color from blue to pink to indicate humidity levels of 30%, 40%, and 50% relative humidity. Double sticky tape on the back of the card allows it to be easily secured to an enclosure lid.
Orderable28416
Mounting Grid Plate for 24 x 30 in. Enclosures
This aluminum backplate is completely pre-punched with a matrix of half-inch-on-center holes.
Orderable6832
Enclosure Filter with 60 Micron Pore Size
One 6832 filter may be installed in one of the small compression fittings (cable entry seals) in the enclosure to allow air pressure to equalize between the inside and outside of the enclosure. As such, the filter is used only when the cable entry seals option is selected for the enclosure. The filter is typically used when a barometric pressure sensor (or, in some cases, the cable termination of a vented submersible pressure transducer) will be located inside the enclosure. The filter has a 60 micron pore size.
Orderable795
Stainless-Steel Nylock Nut 1/4-20
A couple of these nuts are attached to the enclosure bracket. The nut may be purchased to replace a lost or damaged nut.
Orderable7363
Enclosure Supply Kit, Standard Size
The enclosure supply kit includes desiccant, a humidity indicator card, cable ties, wire tie tabs, putty for sealing the conduit, and screws and grommets for attaching peripherals to the enclosure backplate.
Orderable25744
1-1/2 Panel Bushing Pin (Male)
The 25744 and 25746 are the two parts used to create the standard conduit for Campbell Scientific enclosures. If a portion of the conduit for an ENC or PWENC enclosure becomes lost, the 25744 and 25746 can be ordered as replacements.
Orderable25746
1-1/2 PVC Coupling PVC Female Adapter
The 25746 and 25744 are the two parts used to create the standard conduit for Campbell Scientific enclosures. If a portion of the conduit for an ENC or PWENC enclosure becomes lost, the 25746 and 25744 can be ordered as replacements.
Orderable3890
Silicone O-Ring
The 3890 is a silicone O-ring used. Customers will periodically need to replace worn-out O-rings.
Orderable6688
Plug for Cable Entry Connector
The 6688 is the plug that fits inside the 31363 Cable Entry Seal when there is not a cable running through it. The 6688 can be ordered to replace a lost plug.
Orderable
Need Something Not Listed?
(45231)Don't see what you need from among these options? Download the complete configuration list below.
View all product configurationsShips With
(4)7363
Enclosure Supply Kit, Standard Size
Orderable- Bolts (from original mfg)Qty 4
- Nuts (from original mfg)Qty 4
- Sealing washers (from original mfg)Qty 4
Similar Products
(6)ENC24/30S
Stainless-Steel Enclosure, 24 x 30 inches
OrderableENC10/12
Weather-Resistant Enclosure, 10 x 12 inches
OrderableENC10/12R
Raised Lid Enclosure, 10 x 12 inches
OrderableENC12/14
Weather-Resistant Enclosure, 12 x 14 inches
OrderableENC14/16
Weather-Resistant Enclosure, 14 x 16 inches
OrderableENC16/18
Weather-Resistant Enclosure, 16 x 18 inches
Orderable
